 |
Sterling Silver 3 Strand Crimp End 0.7mm
Sterling Silver 3 Strand Crimp End 0.7mm. A crimp end designed to finish multistrand pieces with three seperate crimping tubes, we suggest crimping the middle strand in place first. The internal diameter of the tubes is approx 0.7mm. Our Beading Chain 0.64mm is ideally suited to this end. The ring is approx 5mm outside diameter, the whole piece is approx 14mm long and 6mm wide.
|
Code:
SS-F3SCE07
Exc VAT:
£0.51
Inc VAT:
£0.60
|
|
|
|
 |
Sterling Silver 3 Strand Crimp End 2.0mm
Sterling Silver 3 Strand Crimp End 2.0mm. A crimp end designed to finish multistrand pieces with three seperate crimping tubes, we suggest crimping the middle strand in place first. The internal diameter of the tubes is approx 2.0mm. Our Greek Leather Cord 2mm is ideally suited to this end. The ring is approx 6mm outside diameter, the whole piece is approx 15mm long and 10mm wide.
|
Code:
SS-F3SCE2
Exc VAT:
£0.78
Inc VAT:
£0.92
|
|
|
|
|
 |
Sterling Silver Bead Chain Crimp End 0.7mm
Sterling Silver Bead Chain Crimp End 0.7mm. The crimp end for the Beading Chain can be crimped onto the chain by squashing the middle of the barrel with crimping pliers or flat nosed pliers, there are cuts in the barrel to aid this operation. Not exclusively for use with the beading chain, internal hole size is approx 0.7mm.
|
Code:
SS-FBCCE07
Exc VAT:
£0.26
Inc VAT:
£0.31
|
|
|
|
 |
Sterling Silver Bead Chain Crimp End 1.4mm.
Sterling Silver Bead Chain Crimp End 1.4mm. The crimp end for the Beading Chain 1.0mm can be crimped onto the chain by squashing the middle of the barrel with crimping pliers or flat nosed pliers, there are cuts in the barrel to aid this operation. Not exclusively for use with the beading chain, internal hole size is approx 1.4mm.
|
Code:
SS-FBCCE14
Exc VAT:
£0.26
Inc VAT:
£0.31
|
|
|
|
 |
Sterling Silver Bead Half Chain Connector
Sterling Silver Bead Half Chain Connector. The connector to use with the 1.5mm dia Half Bead chain. There is a 925 stamp on the back of the connector.
|
Code:
SS-FBCHC
Exc VAT:
£0.15
Inc VAT:
£0.18
|
|
|
|
 |
Sterling Silver Bell Cap 7.5 x 6 mm
Sterling Silver Bell Cap 7.5 x 6 mm. The internal diameter at the bell mouth end is approx 5mm, the hole size at the opposite end is approx 1.4mm.
|
Code:
SS-FBC756
Exc VAT:
£0.55
Inc VAT:
£0.65
|
|
|
|
 |
Sterling Silver Bell Cap 8mm
Sterling Silver Bell Cap 8mm. The internal diameter at the bell mouth end is approx 4mm, the hole size at the opposite end is approx 1.75mm.
|
Code:
SS-FBC80
Exc VAT:
£0.67
Inc VAT:
£0.79
|
|
|
|
 |
Sterling Silver Cable Thimble .021
Sterling Silver Cable Thimble .021. Use to protect stringing materials from undue wear or abrasion from clasps and other sharp edged components. Use in the same way that you would use gimp or French Wire, the only difference is that the cable thimble is rigid. Do not pinch the ends completely together, the horseshoe design allows for some slack on the cord to reduce stress. Approx 4mmx3mmx1mm. The hole size is 0.021" or 0.53mm, will work with Beadalon or SoftFlex upto this diameter.
|
Code:
SS-FCATH021
Exc VAT:
£0.10
Inc VAT:
£0.12
|
|
|
|
 |
Sterling Silver Cable Thimble .031
Sterling Silver Cable Thimble .031. Use to protect stringing materials from undue wear or abrasion from clasps and other sharp edged components. Use in the same way that you would use gimp or French Wire, the only difference is that the cable thimble is rigid. Do not pinch the ends completely together, the horseshoe design allows for some slack on the cord to reduce stress. Approx 4mmx3mmx1mm. The hole size is 0.031" or 0.78mm, will work with Beadalon or SoftFlex upto this diameter.
|
Code:
SS-FCATH031
Exc VAT:
£0.12
Inc VAT:
£0.14
|
|
|
|
 |
Sterling Silver Cable Thimble .045
Sterling Silver Cable Thimble .045. Use to protect stringing materials from undue wear or abrasion from clasps and other sharp edged components. Use in the same way that you would use gimp or French Wire, the only difference is that the cable thimble is rigid. Do not pinch the ends completely together, the horseshoe design allows for some slack on the cord to reduce stress. Approx 4mmx3mmx1mm. The hole size is 0.031" or 1.14mm, will work with Beadalon or SoftFlex upto this diameter.
|
Code:
SS-FCATH045
Exc VAT:
£0.14
Inc VAT:
£0.16
|
|
|
|
 |
Sterling Silver Callotte
Sterling Silver Callotte, Calotte or Bead Tip. Used to cover knots at the end of a bead string. This callotte is joined at the bottom.
|
Code:
SS-FCBJ
Exc VAT:
£0.16
Inc VAT:
£0.19
|
|
|
|
 |
Sterling Silver Coil End 2.4mm
Sterling Silver Coil End 2.4mm. A coil end for leather, suede etc. The internal diameter is approx 2.4mm and the end ring has an id of approx 2.5mm. The coil can be glued or crimped onto the material.
|
Code:
SS-FCE24
Exc VAT:
£0.51
Inc VAT:
£0.60
|
|
|
|
 |
Sterling Silver Cone 12 x 4mm
Sterling Silver Cone 12 x 4mm. The hole at the narrow end is 1.3mm diameter.
|
Code:
SS-FCO124
Exc VAT:
£0.67
Inc VAT:
£0.79
|
|
|
|
 |
Sterling Silver Cone 17 x 6mm
Sterling Silver Cone 17 x 6mm. The hole at the narrow end is 1.5mm diameter.
|
Code:
SS-FCO176
Exc VAT:
£1.20
Inc VAT:
£1.41
|
|
|
|
